C00A7
4WD/AWD Transfer Case Unit Actuator Position Sensor A
Position sensor A reports where the transfer case actuator, and thus the range or mode mechanism, currently stands. Magna patents a linear Hall sensor bolted from outside into the case, reading a stepped sector plate (four positions over about 60 degrees) or a plate on the range fork, with a duty-cycle output. Stellantis uses C00A7-13, circuit open: TSB 08-237-23 (2023 Ram 1500) and 08-239-23 (2023 Wagoneer models from a nine-day June 2023 build window, later superseded by 08-122-24) list it with C00A8-13 and other transfer case codes, an illuminated MIL and a 4WD Service light; the cause is a transfer case shift motor connector not fully seated, fixed by a push-pull-push check. Ford's SSM 52152 lists C00A7:11 and :13 on Explorer/Aviator, traced to a chafed harness at the actuator motor.
Possible causes
- Transfer case shift motor connector not fully seated (Stellantis 2023) high
- Harness chafed where it routes to the actuator motor (Ford) medium
- Position sensor A in the actuator failed low
Symptoms
- MIL on (Stellantis) or wrench indicator (Ford)
- 4WD Service light or 4WD Fault Service Required message
- 4WD modes cannot be selected
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C00A7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.