OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C00A6

4WD/AWD Transfer Case Unit Actuator

C00A6 is the general code for the transfer case actuator, the motor unit that presses the transfer case clutch or moves its shift mechanism. Ford uses it with many failure-type suffixes. SSM 49669 covers 2020–2021 Explorer and Aviator AWD with C00A6:07, :18, :19, :4B, :66, :71, :74 or :99 and an AWD lamp, noting that the clutch actuator is not always at fault and that revised pinpoint tests should be followed. SSM 52152 links C00A6:71/:74/:99 with C00A7 and C00A8 codes on 2020–2023 Explorer/Aviator to a harness rubbing on a heat shield where it runs to the actuator motor. TSB 25-2373 ties C00A6 together with C0631 on 2020–2021 models built up to 30 August 2021 to the unit that decouples the front axle, which is swapped together with an updated intermediate shaft. Bosch describes this kind of transfer case clutch actuator in detail.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / A6

Possible causes

  • Harness to the actuator motor chafed on the underbody heat shield high
  • Front axle disconnect actuator/intermediate shaft fault (Ford Explorer/Aviator) medium
  • Transfer case clutch actuator motor worn or seized medium
  • Actuator overheated from heavy use low

Symptoms

  • Wrench (powertrain malfunction) indicator or AWD lamp (Ford)
  • 4WD Fault Service Required message
  • AWD function lost

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C00A6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication