OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C009F

4WD/AWD Rear Differential Unit Actuator B Position Sensor C

Third position channel C of actuator B in the rear differential unit is the subject of this code. Its absence is noticed because the remaining channels A and B still produce transitions that C should follow. Woodward's patent shows the method: after an invalid combination the controller waits for the next one, and the sensor whose output did not move in between is the failed one; the motor can then be driven with a substitute third signal. In a rear unit such as BorgWarner's electro-hydraulic coupling, whose brushless actuator motor carries its own electronics, this monitoring sits next to the motor, so the fault may be reported over the bus by an integrated controller. No manufacturer bulletin mentions C009F. Repairs usually mean wiring checks first, then a new actuator motor.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 9F

Possible causes

  • Open or high-resistance channel C line of actuator B high
  • Hall element C of actuator B defective medium
  • Fault in electronics integrated in the actuator motor low

Symptoms

  • AWD warning lamp
  • Rear torque split or locking function deactivated

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C009F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication