C0098
4WD/AWD Rear Differential Unit Actuator B Data
Covers the data or feedback associated with rear differential actuator B (C0097), as opposed to a plain circuit fault. Where C0097 flags the drive circuit, this code is set when actuator B's reported data, its position, current or status feedback, is missing, out of range or implausible against the command, so the controller cannot confirm what the actuator is doing. AWD coupling patents describe closed-loop control that relies on actuator feedback to meter clutch engagement; losing that feedback degrades control even when the drive circuit is intact. A fault makes the affected rear function untrustworthy, so the controller may default to a safe state and set the AWD/4WD warning lamp; braking and ABS are unaffected. It is the data counterpart to actuator B (C0097) and parallels C0096 for actuator A.
Possible causes
- Actuator feedback data missing or implausible high
- Communication fault with the rear module medium
- Actuator not responding as reported low
Symptoms
- AWD/4WD warning lamp on
- Rear function engagement unconfirmed
- Default safe AWD state
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0098
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.