OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0097

4WD/AWD Rear Differential Unit Actuator B

Covers actuator B of the rear differential unit, the second actuator used on rear drive modules that control two functions, for example torque transfer and a limited-slip or locking element, or that use two coils for redundancy. The controller drives this actuator to engage or modulate the rear coupling; this code is set when the actuator B circuit is open, shorted, out of range or the actuator does not respond. AWD coupling patents describe drive axles with more than one hydraulically or electromagnetically controlled coupling, one for front-to-rear torque transfer and one for side-to-side limited slip. A fault can lock the affected function or default it to open, reducing traction or torque vectoring, and sets the AWD/4WD warning lamp; braking and ABS are unaffected. It is the counterpart to actuator A (C0095).

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 97

Possible causes

  • Rear coupling actuator B failed high
  • Open or shorted actuator circuit medium
  • Binding or worn rear coupling low

Symptoms

  • AWD/4WD warning lamp on
  • Limited-slip or lock function lost
  • Reduced traction or torque vectoring

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C0097

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication