C0095
4WD/AWD Rear Differential Unit Actuator A
Covers actuator A of the rear differential unit, which engages or modulates the electronically controlled rear coupling or locking differential in an all-wheel-drive system. The controller drives this actuator, typically a motor-operated clutch operator or an electromagnetic coil, to send or lock torque at the rear axle on demand. This code is set when the actuator circuit is open, shorted, out of range or the actuator does not respond. Ford documents C0095:99 in the rear drive unit context. AWD coupling patents describe motor-driven ball-ramp or gerotor clutch operators that vary rear torque. A fault can lock the rear unit in one state or default to open, reducing traction, and sets the AWD/4WD warning lamp; braking and ABS are unaffected. The entry follows the SAE J2012 generic definition.
Possible causes
- Rear coupling actuator A failed high
- Open or shorted actuator circuit medium
- Binding or worn rear coupling low
Symptoms
- AWD/4WD warning lamp on
- Rear axle stuck engaged or open
- Reduced traction on loose surfaces
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0095
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.