OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0094

4WD/AWD Rear Differential Unit Temperature Sensor

Covers the temperature sensor of the rear differential unit in an all-wheel-drive system, used to protect the rear drive module and its electronically controlled coupling from overheating. Prolonged torque transfer to the rear axle heats the clutch and fluid; the controller reads this sensor and limits engagement when it gets too hot. This code is set when the sensor signal is out of range, open, shorted or implausible. FCA documents C0094-4B on the Jeep Compass in the rear drive/AWD context. A fault removes thermal protection for the rear unit and can force reduced engagement, setting the AWD/4WD warning lamp; braking and ABS are unaffected. It is the rear-axle counterpart of the power-transfer-unit temperature sensor C0093. The entry follows the SAE J2012 generic definition.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 94

Possible causes

  • Temperature sensor out of range or failed high
  • Harness or connector fault medium
  • Genuine rear unit overheating event low

Symptoms

  • AWD/4WD warning lamp on
  • Reduced rear-axle engagement for protection
  • No thermal protection of the rear unit

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C0094

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication