OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0093

4WD/AWD Power Transfer Unit Temperature Sensor

Covers the temperature sensor of the power transfer unit, which lets the controller protect the AWD clutch from overheating. Sustained torque transfer, for example prolonged slip or towing, heats the clutch pack and its fluid; the controller reads this sensor and reduces or opens the coupling when temperature climbs too high. This code is set when the sensor signal is out of range, open, shorted or implausible. AWD coupling patents describe electronically controlled clutches whose controller monitors operating conditions, including temperature, to protect the hardware. A fault removes thermal protection and can force a safe default such as reduced engagement, and sets the AWD/4WD warning lamp; braking and ABS are unaffected. The entry follows the SAE J2012 generic definition and AWD coupling thermal management.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 93

Possible causes

  • Temperature sensor out of range or failed high
  • Harness or connector fault medium
  • Genuine clutch overheating event low

Symptoms

  • AWD/4WD warning lamp on
  • Reduced AWD engagement for protection
  • No thermal protection of the coupling

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C0093

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication