C0092
4WD/AWD Power Transfer Unit Position Sensor B
Covers position sensor B of the power transfer unit actuator, the redundant or second-channel position feedback the controller cross-checks against sensor A (C0091). Dual position sensors let the controller detect a single faulty channel and keep metering the AWD coupling safely. This code is set when sensor B is out of range, open, shorted or does not track sensor A within tolerance. AWD coupling patents describe closed-loop control of the clutch actuator using position feedback, where losing a channel degrades control. A fault makes the position feedback untrustworthy, so the controller may default to a safe torque split or two-wheel drive and set the AWD/4WD warning lamp; braking and ABS are unaffected. The entry follows the SAE J2012 generic definition and dual-channel actuator position sensing.
Possible causes
- Position sensor B failed or out of range high
- Sensor A/B signals do not correlate medium
- Harness or connector fault low
Symptoms
- AWD/4WD warning lamp on
- Default torque split or 2WD mode
- Inconsistent AWD engagement
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0092
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.