C008A
TCS Mode Control
Covers the traction-control mode selector and its input to the ABS/ESC module, used where the driver can choose among traction/terrain modes such as snow, sand, mud or sport that change the slip targets and intervention strategy. This code is set when the mode signal is stuck, implausible, out of range or the circuit is faulty, so the module cannot tell which mode is selected. The module then defaults to a safe mode and may disable mode selection. It differs from the simple on/off disable switch C0089 in that it carries a multi-position mode rather than a single state. Traction-control patents describe mode-dependent slip targets and torque strategies. A fault limits mode selection and sets the ABS/ESC warning lamp while base braking remains.
Possible causes
- Mode selector signal stuck or implausible high
- Open or shorted selector circuit medium
- Corroded or loose connector low
Symptoms
- Terrain/traction mode cannot be selected
- System defaults to a safe mode
- ABS/ESC warning lamp on
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for C008A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.