C0089
TCS Disable Switch
Covers the driver switch that turns traction (or stability) control off, and its circuit to the ABS/ESC module. Pressing the switch tells the module to disable intervention and light the traction-off indicator; this code is set when the switch signal is stuck, implausible, or the circuit is open or shorted, for example a switch that reads permanently pressed or a broken wire. A stuck-on switch could keep traction control disabled, which is a safety concern, so the module may ignore the switch and default to control enabled. Traction-control patents describe driver-selectable disabling of the intervention. A fault affects the on/off function and sets the ABS/ESC warning lamp while base braking remains. No code-specific public bulletin was confirmed; the entry follows the SAE J2012 generic definition.
Possible causes
- Switch stuck or reads permanently pressed high
- Open or shorted switch circuit medium
- Corroded or loose connector low
Symptoms
- Traction control cannot be toggled
- Traction-off indicator wrong
- ABS/ESC warning lamp on
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for C0089
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.