C0085
Traction Disable Indicator
Covers the traction-disable indicator, the lamp that shows traction control has been switched off by the driver or by the system, as driven or monitored by the ABS/ESC module. The module lights this lamp when traction control is disabled and monitors the output; this code is set when the indicator circuit is open or shorted, the lamp does not respond, or commanded and observed states disagree. It concerns the indicator path, not the traction function; the driver may lose the on/off feedback while control itself behaves normally. It is closely tied to the traction-disable switch and the active-indicator lamp. Traction-control patents describe the driver being able to disable intervention, which this lamp announces. No code-specific public bulletin was confirmed; the entry follows the SAE J2012 generic definition.
Possible causes
- Open or shorted indicator circuit high
- Lamp request not reaching the cluster medium
- Failed indicator bulb or driver low
Symptoms
- Traction-off indicator stuck on or off
- No feedback when toggling traction control
- Failed lamp self-check
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0085
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.