C0084
Traction Active Indicator
Covers the traction-active indicator, the lamp that flashes to tell the driver traction control is currently intervening, as driven or monitored by the ABS/ESC module. The module flashes this lamp during a traction event and monitors the output circuit; this code is set when the indicator circuit is open or shorted, the lamp does not respond, or commanded and observed states disagree. It concerns the indicator path, not the traction function itself, so traction control may still operate while the driver loses its activity feedback. Traction-control patents describe the controller cutting torque and modulating brakes during intervention, which this lamp signals. No code-specific public bulletin was confirmed; the entry follows the SAE J2012 generic definition and warning-lamp output monitoring.
Possible causes
- Open or shorted indicator circuit high
- Lamp request not reaching the cluster medium
- Failed indicator bulb or driver low
Symptoms
- Traction indicator stuck on or off
- No feedback during traction events
- Failed lamp self-check
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0084
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.