C0083
Tire Pressure Monitor Malfunction Indicator
Covers the tyre-pressure-monitor indicator (TPMS lamp) as driven or monitored by the responsible module. Regulations distinguish a steady low-pressure warning from a flashing TPMS-malfunction indication; this code concerns the indicator path, set when the TPMS lamp circuit is open or shorted, the lamp does not respond, or the commanded and observed states disagree. A system that cannot monitor pressure, for example an indirect system that has lost its wheel-speed reference or a direct system missing sensor data, requests the malfunction indication, and a fault in that path sets this code. Indirect-TPMS patents describe deriving pressure from ABS wheel-speed signals, so a loss of that data can drive both a TPMS fault and this indicator code. No code-specific public bulletin was confirmed; the entry follows the SAE J2012 generic definition.
Possible causes
- Open or shorted indicator circuit high
- TPMS cannot monitor, requests fault lamp medium
- Failed indicator bulb or driver low
Symptoms
- TPMS indicator stuck on or flashing
- Failed lamp self-check
- Loss of tyre pressure warning
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0083
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.