C0082
Brake System Malfunction Indicator
Covers the brake system malfunction indicator (red brake warning lamp) as driven or monitored by the brake/stability module. The module commands this lamp for serious brake faults such as low fluid, pressure problems or a control fault, and monitors the output; this code is set when the lamp circuit is open or shorted, the lamp does not respond, or commanded and observed states disagree. It concerns the indicator path rather than the hydraulics, so the underlying brake function may still work while the driver loses an important warning, or the lamp stays on without a brake fault. Electronic brake-system designs route many warnings through this lamp, so it often appears with the brake fault it was meant to announce. No code-specific public bulletin was confirmed; the entry follows the SAE J2012 generic definition.
Possible causes
- Open or shorted indicator circuit high
- Lamp request not reaching the cluster medium
- Failed indicator bulb or driver low
Symptoms
- Red brake lamp stuck on or off
- Failed lamp self-check
- Driver loses brake warning
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0082
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.