OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0080

Wheel Speed Mismatch (Front Axle)

Set when the two front wheel speed signals disagree by more than the allowed amount under conditions where they should match, pointing to a wheel-speed or tyre problem rather than a single open circuit. The ABS/ESC module continuously compares left and right front speeds; a persistent mismatch on a straight road can mean a failing sensor, a damaged tone ring, a mismatched or badly worn tyre or uneven inflation. Indirect-TPMS logic uses the same front-axle comparison to infer pressure loss, so this code and a low-pressure warning can share a root cause. ABS, traction and stability control may be limited and the ABS warning lamp is set while base braking remains. The entry follows the SAE J2012 generic definition and wheel-speed comparison diagnostics.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 80

Possible causes

  • Mismatched, worn or unevenly inflated tyres high
  • Failing sensor or damaged tone ring medium
  • Intermittent sensor wiring low

Symptoms

  • ABS warning lamp on
  • Traction or stability control limited
  • Possible false low-pressure warning

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C0080

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication