C0079
Variable Effort Steering
Covers the variable-effort (speed-sensitive) power steering function, where steering assist is high at low speed for easy parking and reduced at high speed for stability. The ABS/ESC or steering module uses vehicle speed to command the assist level through a solenoid-controlled hydraulic valve or an electric power-steering actuator. This code is set when the variable-effort actuator circuit is faulty, the commanded assist cannot be achieved, or the speed input it relies on is missing. A fault typically defaults steering to a fixed assist level and sets a warning; braking and ABS are unaffected. Because the function depends on a valid speed signal it can appear with wheel-speed or speed-signal codes. The entry follows the SAE J2012 generic definition and speed-sensitive power-steering design.
Possible causes
- Variable-effort valve or actuator fault high
- Missing or wrong vehicle speed input medium
- Harness or connector fault low
Symptoms
- Steering effort fixed or abnormal
- Steering warning lamp or message
- Heavy steering at low speed
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0079
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.