C0078
Tire Diameter
Covers a tyre-diameter fault or mismatch detected by the ABS/ESC or indirect-TPMS logic. The system learns the rolling diameter of each tyre from wheel speeds at known vehicle speed; a tyre that is a different size, badly worn, or a mismatched spare makes one wheel turn at a different rate, which the module flags as a diameter problem. The code is set when a learned or compared diameter falls outside the allowed range or the learn routine cannot complete. Indirect-TPMS patents rely on exactly this rolling-radius comparison to infer low pressure, so a true size mismatch can disturb TPMS and stability logic. A fault can affect TPMS and stability functions and sets the warning lamp; correcting tyre sizes and relearning clears it. The entry follows the SAE J2012 generic definition.
Possible causes
- Mismatched or wrong-size tyre fitted high
- Badly worn tyre changing rolling radius medium
- Diameter not relearned after tyre change low
Symptoms
- TPMS or stability warning lamp on
- Inaccurate speed or TPMS readings
- Learn routine will not complete
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for C0078
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.