C0076
PWM for Traction Control
Covers the pulse-width-modulated signal used within the traction control interface, for example a PWM torque-request or status line exchanged between the stability and powertrain controllers or driving a traction-related actuator. The module monitors the PWM signal's duty cycle, frequency and presence and sets this code when it is missing, out of range or implausible. Traction-control patents describe the controller commanding torque reduction and actuators through defined signal interfaces; a corrupted PWM link breaks that chain. A fault limits traction control and sets the ABS/ESC warning lamp while base braking remains, usually alongside the torque request/deliver codes. No code-specific public bulletin was confirmed; the entry follows the SAE J2012 generic definition and traction-control signalling design.
Possible causes
- PWM signal missing or out of range high
- Open or shorted signal line medium
- Sending or receiving module fault low
Symptoms
- Traction control limited
- ABS/ESC warning lamp on
- Appears with torque request DTCs
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0076
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.