C0075
Brake Pedal Position Performance
A performance code for the brake pedal position input, set when the signal is present but behaves implausibly, for example it does not change as expected, lags, or disagrees with brake pressure and the switch. The stability and brake modules use pedal position to blend regenerative and friction braking and to arm or cancel driver-assist functions. Manufacturers map this code to the input their system uses: Subaru documents C0075 as a concern with the wheel-cylinder pressure-sensor signal in the EyeSight dynamics-control hydraulic module, while some European systems tie it to the brake-light switch feeding the ESP unit. A fault degrades regenerative blending and assist functions and sets the ABS/ESC warning lamp while base braking remains. The entry follows the SAE J2012 generic definition.
Possible causes
- Pedal/pressure sensor signal implausible high
- Pedal or switch out of adjustment medium
- Harness or connector fault low
Symptoms
- Degraded regenerative braking blend
- Driver-assist functions limited
- ABS/ESC warning lamp on
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0075
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.