OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0074

Requested Driving Torque

Covers the requested-driving-torque signal that the ABS/ESC module sends to the powertrain controller during traction and stability control, the counterpart to the delivered-torque signal C0073. When a driven wheel spins the stability controller computes a torque-reduction request and transmits it; this code is set when that request path is faulty, the value is out of range, or the request and the powertrain's response are inconsistent. Traction-control patents describe how the controller overrides the driver's torque demand transiently to bring slip to target by cutting spark, fuel or throttle. A fault limits traction and stability control and sets the ABS/ESC warning lamp while base braking remains; it usually appears together with powertrain or communication codes. The entry follows the SAE J2012 generic definition.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 74

Possible causes

  • Fault on the torque request path high
  • Stability or powertrain module fault medium
  • Mismatched controller calibration low

Symptoms

  • Traction and stability control limited
  • ABS/ESC warning lamp on
  • Appears with powertrain DTCs

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0074

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication