C0073
Delivered Driving Torque
Covers the delivered-driving-torque signal that the engine or powertrain controller reports to the ABS/ESC module during traction and stability control. To limit wheel spin the stability controller asks the powertrain to reduce torque; it then needs confirmation of how much torque was actually delivered to close the loop. This code is set when the delivered-torque value is missing, out of range or does not match the request, for example because of a communication fault or a powertrain controller problem. Traction-control patents describe the request/deliver handshake between the stability and engine controllers for torque reduction. A fault limits traction and stability control and sets the ABS/ESC warning lamp while base braking remains. The entry follows the SAE J2012 generic definition.
Possible causes
- Lost or implausible torque message high
- Powertrain controller fault medium
- Mismatched controller calibration low
Symptoms
- Traction and stability control limited
- ABS/ESC warning lamp on
- Appears with powertrain DTCs
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0073
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.