OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0070

Vehicle Speed Sensor Circuit

Covers the vehicle speed sensor circuit, the source of the overall road-speed signal used by the ABS/ESC module and shared with the speedometer, transmission and other systems. On many vehicles road speed is derived from the wheel speed sensors or a transmission output sensor; this code is set when that speed signal is open, shorted, out of range or implausible against the individual wheel speeds. A fault can disable stability and speed-dependent functions, disturb the speedometer and affect shift scheduling, and sets the ABS/ESC warning lamp while base braking remains. Active wheel speed sensors, which typically feed this signal, read a magnetic encoder through a Hall element and need an intact circuit. No code-specific public bulletin was confirmed; the entry follows the SAE J2012 generic definition.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 70

Possible causes

  • Open or shorted speed signal wiring high
  • Failed wheel or output speed sensor medium
  • Corroded or loose connector low

Symptoms

  • Speedometer inaccurate or dead
  • Stability and speed functions disabled
  • Erratic transmission shifting

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C0070

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication