C006C
Stability System
A general stability-system fault code covering the electronic stability control function as a whole rather than one named sensor or actuator. The ESC module sets it when an internal self-check fails, when the stability function cannot run because required inputs are missing or inconsistent, or when a system-level plausibility check is violated and no more specific code applies. It usually appears with companion codes that name the actual faulty sensor, valve or communication link. Stability control is disabled and the ABS/ESC warning lamp is set while base braking remains. Integrated-control sensor clusters and supervisory logic described in ESC patents coordinate yaw, lateral, steering and wheel-speed inputs; a break anywhere in that chain can set a system-level code. The entry follows the SAE J2012 generic definition.
Possible causes
- Underlying sensor or actuator fault high
- Missing or inconsistent input data medium
- Internal control module fault low
Symptoms
- Stability control disabled
- ABS/ESC warning lamp on
- Appears with companion DTCs
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C006C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.