C006B
Stability System Active Too Long
Set when the stability or traction control system has been intervening continuously for longer than the calibrated maximum. ESC and traction control are meant to act in short bursts; if the controller keeps modulating brakes or reducing torque beyond a time limit it concludes something is wrong, for example a persistently spinning wheel on ice, a dragging brake, a mismatched tyre or a sensor feeding a wrong signal, and stores this code while backing the intervention off to protect the hardware and avoid masking a real fault. The ABS/ESC warning lamp is set and base braking remains. Traction-control patents describe the controller overriding the driver's torque request only transiently to bring slip to target. The entry follows the SAE J2012 generic definition.
Possible causes
- Wheel spinning or slipping for a long time high
- Dragging brake or mismatched tyre medium
- Wrong sensor input driving the intervention low
Symptoms
- Stability/traction control cuts out
- ABS/ESC warning lamp on
- Prolonged intervention before fault
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C006B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.