C006A
Multi-axis Acceleration Sensor
C006A covers a combined multi-axis sensor that delivers several motion axes from one device, the integrated form of the separate lateral, longitudinal, vertical, yaw and roll sensors; NHTSA's brake study and Bosch's six-axis IMU describe such units. The module treats the device as a whole and sets C006A for an internal fault, a failed self-test, lost communication or values that disagree across the axes. FCA documents C006A-49, internal electronic failure, on 2019-2020 RAM 2500 to 5500 trucks: the MIL comes on and bulletin 08-061-20 cures it with new ABS software; a RAM 2500 case report lists it as an active code in the ABS module. Stability, roll and related functions stay off while the fault is present; normal braking remains.
Possible causes
- ABS module software fault (FCA bulletin 08-061-20) high
- Internal sensor fault or failed self-test medium
- Harness or connector fault low
Symptoms
- Stability and roll control disabled
- ABS/ESC warning lamp on
- Multiple inertial faults at once
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C006A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.