C0066
Pitch Rate Sensor
Public SAE J2012 code lists still mark C0066 as ISO/SAE reserved, and no manufacturer documents the code in a retrievable bulletin or service text. One current code table assigns it to the pitch rate sensor, which fits its place between roll rate (C0064), vertical acceleration (C0065) and the yaw/longitudinal pair (C0069); the title follows that use. Such a sensor tracks rotation about the vehicle's lateral axis, as when the body dives under braking or squats under acceleration. Bosch's six-axis inertial unit reports pitch rate next to yaw and roll rate, and a GM patent compares the measured pitch rate with a virtual value built from suspension heights, wheel speeds and accelerations, flags a fault from the difference and rebuilds the signal. Where fitted, a fault limits rollover and stability functions and lights the ESC lamp.
Possible causes
- Pitch rate gyro failed, drifting or out of range medium
- Sensor cluster loose or tilted on its mount medium
- Harness or connector fault at the sensor cluster low
Symptoms
- ESC or stability warning lamp on
- Rollover and stability functions reduced
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0066
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.