C0065
Vertical Acceleration Sensor
C0065 covers the vertical acceleration sensor, which measures up-and-down acceleration of the body. Bosch's inertial measurement unit shows where it lives today: one housing measures the rates of yaw, pitch and roll plus vertical, longitudinal and lateral acceleration and serves several control systems at once. The vertical channel supports rough-road and wheel-lift detection, rollover recognition and, with adaptive damping, the suspension control. The module checks the vertical reading against the other channels and stores C0065 when it is out of range, stuck, noisy or implausible. Depending on the vehicle, stability or suspension functions are reduced and the ESC or suspension lamp lights, while normal braking is unaffected. No manufacturer documents this code publicly.
Possible causes
- Vertical accelerometer failed high
- Loose or shifted sensor cluster mounting medium
- Harness or connector fault low
Symptoms
- Stability or suspension functions disabled
- ABS/ESC or suspension warning lamp on
- Degraded rough-road handling control
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0065
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.