OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0064

Roll Rate Sensor

C0064 covers the roll rate sensor, a gyroscope that measures rotation about the vehicle's longitudinal axis. NHTSA's brake safety study names roll rate among the vehicle dynamics inputs of the ABS/ESC module, and roll stability control uses it, mainly on tall vehicles, to spot the onset of a rollover and counter it with braking and torque reduction. The module checks the roll signal against lateral acceleration and the other inertial channels and sets C0064 when it is out of range, stuck, noisy or implausible. In current six-axis inertial units such as Bosch's IMU the roll gyro shares one housing with pitch and yaw gyros and three accelerometers. Roll stability control switches off and the ESC lamp lights; base braking remains. No manufacturer documents this code publicly.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 64

Possible causes

  • Roll rate gyro failed or out of range high
  • Loose or shifted sensor cluster mounting medium
  • Harness or connector fault low

Symptoms

  • Roll stability control disabled
  • ABS/ESC warning lamp on
  • Rollover mitigation unavailable

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0064

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication