C0063
Yaw Rate Sensor
C0063 flags the yaw rate signal, the rotation about the vertical axis that stability control compares with a reference built from steering angle, lateral acceleration and speed. A lasting gap means understeer or oversteer, so a corrupt signal would trigger wrong interventions; the module therefore stores the code and stops ESC when the value is out of range, frozen, noisy or implausible. FCA documents two variants on the Jeep Compass: C0063-29, invalid signal, with C0061-29 and C0062-29 on 2022 models, cured by ABS software (08-007-23), and C0063-9A, component or system operating conditions, on 2024 models, where the MIL is on and the driver assistance module is reprogrammed (08-128-24). Normal braking stays available throughout.
Possible causes
- ABS or driver assistance module software (FCA 08-007-23, 08-128-24) high
- Yaw rate gyro failed or out of range medium
- Sensor cluster loose or shifted on its mount low
Symptoms
- Stability control disabled
- ABS/ESC warning lamp on
- Unexpected or absent stability intervention
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0063
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.