C0062
Longitudinal Acceleration Sensor
C0062 flags the longitudinal acceleration signal, the fore-aft reading used for hill hold, grade detection, all-wheel-drive torque split and brake distribution. The module checks it against the change in wheel speed, braking and throttle and against the other inertial channels, and stores the code for a value out of range, frozen, noisy or implausible. FCA documents C0062-29, invalid signal, on the 2022 Jeep Compass with C0061-29 and C0063-29, lighting the MIL and the ESC and parking brake warnings until the ABS module receives new software (08-007-23). On the 2019 RAM 1500, FCA lists C0062 among the codes a PCM software update addresses (18-058-20). Stability and hill hold are switched off while the fault is present; normal braking remains.
Possible causes
- ABS or PCM software fault (FCA 08-007-23, 18-058-20) medium
- Longitudinal accelerometer failed medium
- Sensor cluster loose or shifted on its mount low
- Harness or connector fault low
Symptoms
- Stability and hill-hold functions disabled
- ABS/ESC warning lamp on
- AWD behaviour may change
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0062
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.