OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0061

Lateral Acceleration Sensor

C0061 flags the lateral acceleration signal, which the stability module compares with the value expected from steering angle, yaw rate and speed. The code sets when the signal is out of range, frozen, noisy or implausible against the other inertial channels. FCA uses it on the 2022 Jeep Compass as C0061-29, signal invalid, together with C0062-29 and C0063-29; customers see the MIL plus ESC and parking brake warnings, and bulletin 08-007-23 reflashes the ABS module. FCA also lists C0061 in a PCM update for the 2016 Jeep Renegade 2.4 l. Mazda uses the same number in the headlight auto-leveling module: on the 2018 CX-3, C0061:54 means the acceleration sensor's initial position was not learned, typically after transport on a trailer (bulletin 09-012/18).

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 61

Possible causes

  • ABS module software fault (FCA bulletin 08-007-23) medium
  • Headlight leveling sensor position not learned after transport (Mazda) medium
  • Lateral accelerometer failed or out of range medium
  • Sensor cluster loose or shifted on its mount low

Symptoms

  • Stability control disabled, ESC warning lamp on
  • MIL on together with ESC and parking brake warnings (FCA)
  • Headlight leveling warning flashes (Mazda)

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0061

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication