OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0060

Right Rear Wheel Speed Sensor Circuit

Covers a general fault in the right rear wheel speed sensor circuit. The active sensor feeds rear wheel rotation to the ABS/ESC module for anti-lock, traction and stability control and electronic brake-force distribution; the module monitors the two-wire circuit for opens, shorts to power or ground, out-of-range current and a missing signal while the vehicle moves. A broken or chafed harness, a failed sensor or a corroded connector sets the code and disables ABS, traction and stability control while base braking remains. It overlaps with the right rear circuit-malfunction code C0050 and the intermittent code C0066, differing in the exact fault qualifier the module assigns. Bosch active sensors read a magnetic encoder through a Hall element and need an intact supply. The entry follows the SAE J2012 generic definition.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 60

Possible causes

  • Broken or chafed sensor harness wiring high
  • Wheel speed sensor failed medium
  • Corroded sensor connector low

Symptoms

  • ABS warning lamp on
  • ABS and stability control disabled
  • Speedometer may read erratically

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C0060

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication