C0052
Steering Wheel Position Sensor Signal A
Covers signal A of the steering wheel position sensor. Multi-track steering-angle sensors output several phase-shifted signals (A, B, C, D) so the ESC module can reconstruct absolute angle and detect a single bad channel by cross-checking. This code is set when channel A is out of range, open, shorted or does not agree with the other channels. Ford documents C0052 together with C0053, C0054 and C0055 on 2020-2021 Police Interceptor Utility vehicles, where the codes store in the steering module if the police-package steering-wheel accessory outputs are left unwired. A fault disables stability control and sets the ABS/ESC warning lamp while base braking remains. The entry follows the SAE J2012 generic definition and multi-track steering-angle sensor design.
Possible causes
- Signal A open or unconnected high
- Steering angle sensor channel A failed medium
- Harness or connector fault low
Symptoms
- Stability control disabled
- ABS/ESC warning lamp on
- Implausible steering angle reading
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0052
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.