C004F
ABS Control Module Over Temperature
Set when the ABS/ESC control module or its integrated pump motor reaches a temperature above the safe operating limit. Repeated or prolonged pressure modulation, for example during long downhill ABS use, frequent stability interventions or an electrical fault that keeps the pump running, heats the hydraulic unit and its motor; the module monitors an internal temperature model or sensor and stores this code to protect the hardware. It temporarily disables ABS, traction and stability control until the unit cools, then restores them. A persistent over-temperature points to a seized pump, a stuck valve causing continuous pumping or a control fault. Base braking remains and the ABS warning lamp is set while the function is suspended. The entry follows the SAE J2012 generic definition and ABS hydraulic unit thermal protection.
Possible causes
- Stuck valve causing continuous pump run high
- Pump motor seizing or high friction medium
- Prolonged heavy ABS/ESC use low
Symptoms
- ABS and stability control temporarily disabled
- Function returns after cooling
- ABS warning lamp on during the event
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C004F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.