OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C004C

Brake Booster Motor A Position Sensor Exceeded Learning Limit

Set in an electric or electro-hydraulic brake booster when the position sensor of booster motor A reports a learned reference value outside the allowed adaptation range. The brake control unit learns the rest and travel positions of the motor-driven actuator so it can meter assist precisely; if the learned value drifts beyond the calibrated window the module can no longer trust the actuator position and stores this code. It points to a worn or shifted sensor, mechanical wear in the actuator or a learning routine that ran under wrong conditions rather than a hard electrical fault. Controlled brake assist is reduced or disabled and the brake or ABS warning lamp is set; conventional braking remains. No code-specific public bulletin was confirmed; the entry follows the SAE J2012 generic definition and electro-hydraulic brake actuator design.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 4C

Possible causes

  • Position sensor worn or shifted high
  • Mechanical wear in the booster actuator medium
  • Learning routine ran under wrong conditions low

Symptoms

  • Reduced or inconsistent brake assist
  • Changed brake pedal feel
  • ABS or brake warning lamp on

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C004C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication