OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0049

Brake Fluid Level

Covers the brake fluid level input to the brake or stability module, used to warn the driver and to disable functions that must not run with low fluid. A float switch or sensor in the master-cylinder reservoir signals when fluid drops below a safe level; the module sets this code and lights the red brake warning indicator. A genuine low level usually means worn brake pads that have drawn fluid into the calipers or a leak in the hydraulic system, but Ford documents cases on 2021-2025 Bronco and 2024 Mustang where a false low-level message with C0049 (sub-types :01, :0A) was caused by the reservoir or its sensor and resolved by replacing the reservoir. Low fluid can disable ABS and stability control; the condition should always be inspected because it can indicate a leak.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 49

Possible causes

  • Low fluid from worn pads or a leak high
  • Faulty reservoir level sensor or float medium
  • Reservoir fault causing false reading low

Symptoms

  • Red brake warning indicator on
  • Low brake fluid message
  • ABS and stability control may be disabled

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for C0049

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication