C0048
Brake Booster Travel Sensor
Covers the travel (position) sensor of the power brake booster or brake actuation unit, which reports how far the booster input rod or piston has moved so the module can match assist to driver demand. The module monitors the sensor for a signal outside the valid range, an open or short and a position that is implausible against pedal position or boost pressure. It complements the booster pressure sensor C0047: travel gives displacement while pressure gives force, and together they let the module close the assist loop in electronic and brake-by-wire boosters. A fault reduces or disables controlled assist, changes pedal feel and sets the brake or ABS warning lamp while base braking remains. Patents describe an electrical travel sensor that tracks the moving wall inside a vacuum booster. No manufacturer documents this code publicly.
Possible causes
- Travel sensor out of range or failed high
- Binding or worn booster mechanism medium
- Harness or connector fault low
Symptoms
- Changed brake pedal feel
- Reduced or inconsistent brake assist
- ABS or brake warning lamp on
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0048
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.