C0047
Brake Booster Pressure Sensor
Covers the pressure sensor in the power brake booster or brake actuation unit, which measures boost or assist pressure so the module can regulate assist and detect loss of boost. The module monitors the sensor for a signal outside the valid range, an open or short and values that disagree with pedal demand or master-cylinder pressure. Ford documents C0047:64 on 2020 Explorer and Lincoln Aviator, where it is stored in the ABS module with a noticeable loss of power brake assist or a soft, long brake pedal just after start-up. A fault reduces or disables controlled assist and sets the brake or ABS warning lamp; the driver may feel a harder, longer pedal until assist is restored.
Possible causes
- Booster pressure sensor out of range high
- Module calibration or software issue medium
- Harness or connector fault low
Symptoms
- Lack of power brake assist
- Soft or extended pedal at start-up
- ABS or brake warning lamp on
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0047
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.