C0046
Brake Pressure Sensor A/B
A correlation code for the pair of brake pressure sensors A and B, set when their readings do not agree within the expected tolerance. Where C0044 and C0045 flag a single-sensor electrical fault, this code is a plausibility fault: at the same instant both sensors should report consistent pressure (allowing for their known relationship), and a persistent mismatch indicates one sensor has drifted, a hydraulic fault separates the circuits, or a signal is corrupted. The stability and brake modules rely on agreement to trust the pressure reading for stability, brake assist and brake-by-wire control. A fault disables those functions and sets the ABS or brake warning lamp while base braking remains. NHTSA lists C0046 in the J2012 table of its EPS report. No manufacturer documents it publicly.
Possible causes
- One pressure sensor drifted or biased high
- Hydraulic fault separating the circuits medium
- Signal corruption or wiring fault low
Symptoms
- ABS or brake warning lamp on
- Stability and assist functions disabled
- Changed brake assist behaviour
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0046
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.