OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0043

Brake Pedal Position Sensor Circuit B

Covers circuit B of the brake pedal position sensor, the redundant second channel that the module cross-checks against channel A (C0042). Dual-channel pedal position sensors provide two independent voltage signals, often with opposite slopes, so the module can detect a single-channel fault by correlation. This code is set when channel B is out of range, open, shorted or does not track channel A within tolerance. It supports brake-by-wire assist, regenerative braking blending and precise stop-lamp and cruise control. A fault can disable assist and cruise functions and set a warning lamp while base braking remains. No manufacturer documents this code publicly; NHTSA's EPS report lists C0043 in its J2012 table, and its brake study explains how the module uses the pedal sensor to read driver intent.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 43

Possible causes

  • Pedal position sensor channel B out of range high
  • Channel A/B signals do not correlate medium
  • Harness or connector fault low

Symptoms

  • Brake lights stay on or behave oddly
  • Cruise control will not set
  • ABS or brake warning lamp on

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C0043

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication