C0042
Brake Pedal Position Sensor Circuit A
Covers circuit A of the brake pedal position sensor, which reports how far the pedal is pressed rather than just on/off like a switch. The brake or stability module uses this analog signal for brake-by-wire assist, regenerative braking blending and precise stop-lamp and cruise control. The module sets the code for a signal outside the valid voltage range, an open or short, or a value that disagrees with the pedal switch or a second sensor channel. Chrysler documents C0042 on 2015-2017 Durango and Grand Cherokee alongside P0572, with the brake lamps remaining lit or cruise control failing to engage, and prescribes checking and relearning the pedal rest position. A fault can disable assist and cruise functions and set a warning lamp.
Possible causes
- Pedal position sensor out of range high
- Pedal home position not learned medium
- Harness or connector fault low
Symptoms
- Brake lights stay on
- Cruise control will not set
- ABS or brake warning lamp on
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0042
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.