C0041
Brake Pedal Switch B
Covers brake pedal switch B, the redundant second brake switch used to cross-check brake pedal switch A. The two switches change state in a defined pattern as the pedal is applied; the module compares them and sets this code when switch B is stuck, open, shorted or disagrees with switch A. The redundant signal supports driver-assist features that must reliably know whether the driver is braking. Honda documents DTC C0041-14 as a brake switch fault that, together with resting a foot on the pedal, can falsely trigger the adaptive-cruise, collision-mitigation and lane-/road-departure warning indicators. A fault can disable those assist functions and illuminate warning lamps; stop lamps may be affected depending on wiring.
Possible causes
- Brake switch failed or misadjusted high
- Open or shorted switch wiring medium
- Corroded or loose connector low
Symptoms
- Driver-assist features disabled or false triggers
- Cruise or adaptive cruise will not set
- Warning lamp or driver message
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for C0041
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.