C003D
Rear Wheel Speed Sensor
Covers a single rear wheel speed sensor on vehicles that use one combined rear speed signal, for example a rear axle or differential-mounted sensor, instead of separate left and right rear sensors. It reports rear rotation to the ABS/ESC module for anti-lock, traction and stability control and electronic brake-force distribution. The module monitors the circuit for opens, shorts to power or ground, a signal outside the valid range and a missing signal while moving. A fault disables ABS, traction and stability control and lights the ABS warning lamp while base braking remains. No manufacturer documents this code publicly; NHTSA's EPS safety report carries C003D as the rear wheel speed sensor in its J2012 table.
Possible causes
- Rear wheel speed sensor failed high
- Open, shorted or chafed sensor wiring medium
- Corroded sensor connector low
Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- Speedometer may read erratically
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C003D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.