OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C003C

Rear Tone Wheel

Covers a single rear tone wheel (reluctor or encoder ring) on vehicles that use one combined rear wheel speed signal, for example from a differential or rear axle sensor, rather than separate left and right rear rings. It is a signal-plausibility code set when the module sees an erratic, noisy or intermittent rear speed signal consistent with a damaged, contaminated or loose tone ring rather than a sensor circuit failure. A fault disables ABS, traction and stability control and lights the ABS warning lamp while base braking remains; on such vehicles rear-based functions like electronic brake-force distribution are affected. No manufacturer documents this code publicly; NHTSA's EPS safety report lists the rear tone wheel code C003C among the J2012 wheel speed codes.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 3C

Possible causes

  • Damaged or contaminated tone ring high
  • Loose or displaced bearing or axle ring medium
  • Excessive sensor-to-ring air gap low

Symptoms

  • ABS warning lamp on
  • ABS and stability control disabled
  • Intermittent rear speed signal

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C003C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication