C003B
Right Rear Wheel Speed Sensor Supply
Covers the supply circuit that powers the right rear active wheel speed sensor, completing the supply set with C0032 and C0038. Active sensors need a regulated voltage from the ABS/ESC module; this code is set when that supply is open, shorted to ground or to another voltage, or outside the regulated range so the sensor cannot produce a valid signal. It is distinct from the sensor-signal code C003A in that the fault is on the feed rather than in the sensor element. A fault disables ABS, traction and stability control for that corner and lights the ABS warning lamp while base braking remains. No manufacturer documents this code publicly; NHTSA lists C003B as right rear supply in the J2012 table of its EPS safety report.
Possible causes
- Open or shorted sensor supply wire high
- Corroded connector on the supply side medium
- Module sensor supply output fault low
Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- No wheel speed signal from this corner
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C003B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.