C0035
Right Front Wheel Speed Sensor Supply
C0035 reports a fault in the feed that powers the right front active wheel speed sensor, the right-hand partner of C0032. The ABS/ESC module supplies the sensor with a regulated voltage; an open feed, a short to ground or to another voltage, or a supply outside its window leaves the sensor unable to send a speed signal. NHTSA's EPS safety report lists C0035 with this meaning in its table of J2012 wheel speed codes. Caution with older GM vehicles: GM numbers its four wheel speed sensor circuits C0035 to C0050 in its own scheme (bulletin 16-NA-248, PIE0456), so a GM C0035 is a sensor circuit fault rather than a supply fault. ABS, traction and stability control switch off and the ABS lamp lights; normal braking remains.
Possible causes
- Open or shorted supply wire to the right front sensor high
- Corroded or loose sensor connector medium
- Sensor shorted internally and pulling the supply down medium
- Sensor supply output of the ABS module faulty low
Symptoms
- ABS warning lamp on
- ABS, traction and stability control disabled
- No speed signal from the right front wheel
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0035
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.