C0032
Left Front Wheel Speed Sensor Supply
Covers the supply circuit that powers the left front active wheel speed sensor. Active sensors need a regulated voltage from the ABS/ESC module; this code is set when that supply is open, shorted to ground or to another voltage, or is outside the regulated range so the sensor cannot report a valid signal. It is distinct from the sensor-signal code C0031 in that the fault is on the feed rather than in the sensor element or its output. A fault disables ABS, traction and stability control for that corner and lights the ABS warning lamp while base braking remains. No manufacturer documents this code publicly; NHTSA reproduces the J2012 wheel speed sensor codes, with C0032 as left front supply, in its EPS safety report.
Possible causes
- Open or shorted sensor supply wire high
- Corroded connector on the supply side medium
- Module sensor supply output fault low
Symptoms
- ABS warning lamp on
- ABS and stability control disabled
- No wheel speed signal from this corner
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0032
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.