OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0025

Brake Pedal Feedback Pressure Sensor Circuit

C0025 covers the pressure sensor on the pedal feedback side of a decoupled or brake-by-wire system, the measuring partner of the feedback valve C0024. In such systems the pedal pushes fluid into a pedal feel simulator via a simulator valve the module can open or close, while separate sensors read pressure in the simulator circuit and in the wheel circuit. A patent for this layout reads the driver's request from a pressure sensor on the master cylinder side and describes a standstill self-test that opens the simulator valve and watches the pressure rise. The module sets C0025 for a signal out of range, an open or short, or a value that does not fit pedal travel. Pedal feel changes, assist may drop to a mechanical fallback, and the brake or ABS lamp lights. No manufacturer documents this code publicly.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 25

Possible causes

  • Feedback pressure sensor out of range high
  • Harness or connector fault medium
  • Internal brake actuation unit fault low

Symptoms

  • Changed or abnormal pedal feel
  • Loss of brake assist, driver messages
  • ABS or brake warning lamp on

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C0025

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication