OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0024

Brake Pedal Feedback Pressure Solenoid Circuit

Covers the solenoid that generates brake pedal feedback pressure in an electronic or brake-by-wire braking system. Because the driver is hydraulically decoupled during controlled braking, a pedal-feel simulator uses this solenoid to build a controlled counter-pressure so the pedal feels natural. The module monitors the coil circuit for opens, shorts and out-of-range resistance and checks that feedback pressure tracks the command. GM documents C0024 on 2019-2020 Cadillac XT6, Chevrolet Blazer and GMC Acadia with reduced brake assist, warning messages in the driver display and an altered pedal feel. A fault alters pedal feel and may reduce controlled assist; the brake or ABS warning lamp is set.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number– / 24

Possible causes

  • Feedback solenoid open or shorted high
  • Harness or connector fault medium
  • Internal brake actuation unit fault low

Symptoms

  • Changed or abnormal pedal feel
  • Loss of brake assist, driver messages
  • ABS or brake warning lamp on

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C0024

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication